Sunday, August 25, 2019

Climate Change Research Paper Example | Topics and Well Written Essays - 1750 words

Climate Change - Research Paper Example It cannot be denied that GLOBAL WARMING was under consideration by almost every country and different measures are been taken to prevent but it is required on a very large scale with a contribution of every individual living in. It can be done in a lot of ways for example promote plantation, avoid using plastic products as it a non-biodegradable item and a main source of pollution, energy conservation, recycling of goods, preservation of natural resources, and banning the burning of fossil fuels which contributes highly in the destruction of the ozone layer which works as an umbrella or a shelter from strong sun radiations affecting the globe directly .All these factors are causing Global Warming which works as a driving force for the fluctuations in Climatic System. Climatic change does not only affect the nature but majorly affects the living beings. Whereas, drastic changes are coming up because of the activities done by the masses for worldly pleasures for which natural resources are continuously been misused and immeasurably been wasted. There are some major changes in the climatic system which occurs because of the rise in temperatures of the living world. Human Influences is directly propostional to the global warming. Following are Sub-reasons for the change in climate cycle: Orbital Variations Solar Output Volcanism Ocean Variability Plate Tectonics These are the regions where fluctuations occurs and affect the globe and each will be discussed thoroughly further in this report. It is recorded previously in surveys that Climatic Changes are affecting adversely on Biodiversity. This is alarming for the species which are already left with a handful numbers like Polar Bears, Indus Dolphins and many more. They are getting affected because of the change in eco-system occurring because of the changes in the earth’s crust. As the global temperature rises, it starts throwing off to cool down. Volcanic Eruptions is one of the cooling processes, when done with the eruption, the temperature of the globe drops down to 0.5 degrees. Same is the case is with Earthquakes and Ocean Variability. Footnote: (Wikipedia, the free encyclopedia) Historical and Archeological Evidences: It is studied in the continuous research being done in this aspect and different historical and archeological evidences are pouring in that how the climate used to be in a particular region and how it has become after several years. Civilization changes also predict to a certain level of how the climate probably was. According to archeological evidences, researchers have put their efforts on different areas of life through which they might get to the key. Some of the under consideration areas of life which can predict or can give a clue to the present world that climatic cycle have changed to what extent and whether good or bad. The following are: Glacier changes: Glaciers are the most sensitive indicator of the climate change because of its immediate reaction to any changes in the temperature. There are two things which can contribute in the shrinkage and growth of the glaciers, they are orbital variability and external forcing. Evidences are found because glaciers leaves moraines that contain an anonymous amount of material including organic matter

Saturday, August 24, 2019

History and Political Science Essay Example | Topics and Well Written Essays - 750 words - 13

History and Political Science - Essay Example The industrial revolution which started in Europe was a major trigger for over expansion of economies as several pieces of engineering were developed which are main propellers for the industrial revolution and booming economies. England was the source of the industrial revolution which was started in 1760 and later gained strength till late 19th century where the effects of the industrial revolution can be measured. Savery Engine Steam engine looms and furnaces were the developments which occurred during the industrial revolution. James Watt and Sir Joseph Whitworth were the inventors whose inventions propelled the growth (Crafts, 1985). The industrial revolution further gained strength and momentum with the development of industries and technological innovations which acted as a fuel for growth. The increase in American corporation was witnessed which resulted in the concentration of wealth of the nation into fewer hands leading to disparity among the people. Mechanization was also introduced in the farming process as well, which lead to the production of quality agricultural products, making the United States a pioneer in food production and export. Due to this growth, migration to the United States picked up momentum. This further developed issues as more and more labor were available to help in the production process (Crafts, 1985). Nevertheless, industrialization also lead to some serious third party protests due to the shift of power and changes in policies. The process of industrialization encouraged development and strengthening of political institutions in the economy and as result, the democratic system gained strength. The policies designed by the people underpinned the economic growth. Similarly, Russia was also developing itself; however, the growth witnessed was very slow as compared to other European Countries and the United States. The major obstacle which slowed down the process was the population of Russia. Russia’s major source of indu strialization was the coal and steel production which had quadrupled in the 19th Century. As a result, Russia was able to develop infrastructure and other facilities across the country. However, Debt issues also rose at the same time due to which, Russia was unable to trade with the United States and obtain the benefits of trade (Blackwell, 1968). Europeans rule over colonies of Africa and South Asia Asia has always been of immense interest for the colonials of Europe. The main attraction towards Asia was the existence of rich mineral deposits and agricultural produce. Europeans had been able to develop businesses in these colonies where primary produce was sent back to Europe which was then converted to finished goods. This process of colonization had also become successful because of the technological backing which the Europeans enjoyed due to industrial revolution and innovations in technology and equipment. East India Company, slowly and gradually, strengthened its’ roots in the Asian colonies by starting businesses and developing economic relations with the rulers at that time. Due to the economic and industrial capability of Europeans, they outclassed Asians and gained control over them. They had a powerful army and could deploy their troops anytime they wanted along with heavy artillery.

Friday, August 23, 2019

Teachers Attitudes towards Autistic Children Research Paper

Teachers Attitudes towards Autistic Children - Research Paper Example By doing this a pattern of behavior forms where the student either answered very quickly without thinking or doesn't even try. With autistic children, this can be absolutely critical. Autistic children are generally found to be at least average intelligence, possibly above-average. However, IQ tests simply do not work with these kinds of students, due to the requirement of quick response. When not even sure that you autistic children see the world in the same way. In fact, we know so very little about this condition that any kind of properly done and reported research will be valuable. The nature of the disorder, mainstreaming is very important, because one of the areas in which the student desperately needs to improve his social communication. In special classes, where the students suffer from this disorder, there is a double deficit in communication among students. However, by mainstreaming autistic students in a regular classroom, perhaps with the helper, the autistic student is p rovided the opportunity to communicate with other students lacking this disability. With the proper training of the teacher and the coaching of the other students, the benefits can be reciprocal. You autistic student is provided with an environment where responses can be immediately acknowledged, and the regular students are provided with an opportunity to understand this disability and learn that an autistic student is otherwise quite a normal person. One component of any research project would be the literature review. A review of the literature can give the researcher an idea of what questions have been researched and the methodology used. Furthermore, in well-done research reports, the questions themselves are generally represented. Once the literature review is completed and the results analyzed, then conclusions can be made about the suitability of the research. In order for the research to be valuable, it must investigate an area which has not been well researched or answer a question which has not been asked and answered, or use the methodology that will result in different kinds of data. In researching the above question in a literature review, a great deal was found referring to autism, nearly 25,000 responses in EBSCO database alone. The focus was narrowed to documents from the year 2006 to the present. This reduced to do just over 14,000 results. By adding the word "mainstreaming" results were cut to a manageable eighty. Fourteen of these results were found to be relevant with six dealing with attitudes and perceptions of teachers, and the balance dealing with methods of teaching. From these results, it was clear that this question has not been well investigated. Those results which dealt directly with teachers attitudes did not give much information. Therefore, it was decided from the literature review that this was a good question to investigate. Primary Research Of the various methods available to cover this research, the choice must be made amo ng quantitative, qualitative, and mixed methods research. Due to the nature of the question is probable that strictly quantitative will not give much useful information because it deals with attitudes. Therefore, one must choose between qualitative and mixed methods. One extremely useful qualitative method is direct observation.

Thursday, August 22, 2019

Parental Decisions Impact Childhood Obesity Essay Example for Free

Parental Decisions Impact Childhood Obesity Essay Society, in general, has drastically changed over the past century. Growth and expansion have paved the way for new technological advances, but not with some downfalls to go along with it. One such downfall of new technology would be the â€Å"convenience factor† (convenient stores for junk food, convenient to watch television, play video games, watch a movie, talk or text on a cellular phone as opposed to physical exercise, convenient for parents to stop by fast food as opposed to healthy meals). Lack of parental controls in these areas in conjunction with the â€Å"convenience factor† has lead to childhood obesity. This is an increasingly growing disease and will continue to be so if society does not stop being so convenient. The American Society today has become â€Å"obesogenic’, characterized by environments that promote increased food intake, unhealthy foods, and physical inactivity (Centers for Disease Control and Prevention, 2010). People (children and adults) spend more time in front of televisions or computers and less time exercising. We drive a car everywhere we go as opposed to walking or riding a bicycle. Children play more video games instead of playing hide and seek, which requires them to run around, being active and getting exercise. We lead busier lives so time does not allow for spending it in the kitchen preparing healthy meals. Parents live such hectic lifestyles which often lead to dining or getting take out at a fast food restaurant, making them guilty of contributing to childhood obesity. Children with obese parents are likely to follow in their parents footsteps and become obese themselves. Overweight and obesity result from an energy deficiency. This incorporates taking in too much food (too many calories) and lack of exercise; thus defining obesity. The imbalance between calories consumed and calories used can result from the influences and interactions of a number of factors, including genetic, behavioral, and environmental factors. Studies indicate that certain genetic characteristics may increase an individuals susceptibility to excess body weight. However, this genetic susceptibility may need to exist in conjunction with contributing environmental and behavioral factors (such as a high-calorie food supply and minimal physical activity) to have a significant effect on weight. Genetic factors alone can play a role in specific cases of obesity. The genetic characteristics of the human population have not changed in the last three decades, but the prevalence of obesity has tripled among school-aged children during that time. Because the factors that contribute to childhood obesity interact with each other, it is not possible to specify one behavior as the cause of obesity. Behaviors include energy intake, physical activity, and sedentary behavior. Home, child care, school, and community environments can influence childrens behaviors related to food intake and physical activity (Centers for Disease Control and Prevention, 2009). Parents in the workplace often lead demanding, hectic lifestyles that have a direct reflection on home life activities. Activities, such as eating habits for their children, are a casualty of their fast-paced environment. Such lifestyles lead to quick unhealthy meals, such as stopping at a fast-food establishment and consuming a high caloric meal. These types of meals are historically unhealthy with no nutritional value. Nutritional items, such as fruits and vegetables, are limited at these types of establishments. Healthy, home cooked meals are not the â€Å"normal† routine for parents to provide their children of this era. Time does not allow for parents to prepare healthy, home cooked meals. â€Å"The evidence is compelling that the obesity epidemic is largely caused by people’s eating unhealthy food and consuming bigger portion sizes. These unhealthy behaviors are not just a matter of poor decisions individuals make; rather, the environment in which people live determines behavioral choice† (Isaacs Swarts, 2010). Parents’ workplace habits can directly affect their children’s daily eating routines. Children are relying on parents to provide them with healthy meals. There are many things parents can do to assist children in developing healthy eating habits. Offering fruits and vegetables, dairy products or whole grain items as nutritious snacks, as opposed to allowing them to submerge themselves in chips or sugar filled snacks, is a viable alternative to an unhealthy diet. The obesity rate for children would decrease if parents would make time to plan a healthy weekly menu. By doing so, parents are ensuring that their children get the daily recommended amount of fruits and vegetables in their diet, thus making for a healthier child. Parents should lead by example. Children need to see parents eating different things, to encourage the child to want to try new food items. â€Å"Children and adolescents are dependent on their parents for both economically and emotionally during much of this period of rapid growth† (Davies Fitzgerald, 2008, pg. 25). One of the best ways to decrease obesity in children is to increase physical activity levels throughout the entire family. Parents, at home or at the workplace, are faced daily with busy schedules, long hours and time management issues (i. e. nsuring all required daily activities, such as household responsibilities, errands are completed). These tasks are direct contributors for the lack of time set aside for physical activity with their children. Also, parents’ daily work schedules do not allow much, if any, time to incorporate a daily physical exercise routine for their children, let alone to monitor such activities. Parents should act as role models by setting examples for their children, such as allowing their children to see them exercise and being active themselves. By â€Å"leading by example†, this should encourage children to emulate them. According to the American Heart Association and the National Association for Sport and Physical Education (Payne, 2010), children should get at least 20 minutes of regular vigorous exercise that makes them sweat and breathe hard. With the apparent lack of physical activity, parents need to create an environment that is conducive to building a daily regime of physical activities that slowly grow over time. â€Å"Minutes spent playing kickball with friends during recess count toward the hour-long daily goal, as does climbing trees in the backyard after school. It doesnt have to be all at once,’ says Nancy Brown, CEO of the AHA. ‘Kids should be doing things appropriate for their age, so that [exercise] becomes a behavior and a natural part of what they do’† (Payne, 2010). Providing just small increments of daily activity that is geared towards the child’s age category can foster a lifetime of behavioral changes that could prevent the onset of obesity at a later age. Another factor in the saga of fighting childhood obesity is the issue of safety and having a safe environment in which to add physical activity. Advocate for well-maintained, safe sidewalks and bike paths in your neighborhood, and volunteer to supervise the use of school facilities after hours. Children are more likely to want to play outside—and youll feel more comfortable with them doing it—if its safe, so attend neighborhood association or city council meetings to request proper upkeep of nearby sidewalks and paths. Also, consider gyms and tracks at local schools as options for physical activity after hours and on weekends. Often, schools are willing to make gyms and equipment available on the weekends but simply need parents to volunteer to supervise, Brown says† (Payne, 2010). This avenue of taking facilities that already exist and adding in a safety factor so that they may be used more often could reach into a vast majority of neighborhoods and schools that are currently excluding physical education programs. This seemingly mundane action by a few sets of determined parents could catch on and create new and exciting ways in which physical activities could be introduced to children. In today’s day and age of electronics, technological advances in this area continue to rise at record numbers. Features and upgrades to many electronic devices are geared toward a more convenient, user friendly target market. Such markets, unfortunately from a health perspective, are focused on our children. Convenient and satisfying methods of entertainment, such as television, movies, video games, talking/texting on cellular phones, computers, etc. far outweigh pure physical activity and exercise. Parents’ lack of control in these areas, as opposed to physical exercise, is a factor in childhood obesity. Children would rather be sedentary playing electronic games on a television, cellular phone or computer, as opposed to playing games requiring physical exercise, such as hide and seek or kickball . â€Å"The media may shape childrens food choices and caloric intake, including exposing children to persuasive messages about food, cuing them to eat, and depressing satiety cues of eating while viewing. According to estimates by the Federal Trade Commission (FTC), children between 2 and 11 years are exposed to 25,600 advertisements per year, of which 5,500 (or 15 per day) are for food or beverages. A 2009 content analysis of foods advertised during childrens television programming revealed that most foods marketed to children are high in salt, sugar, and fat and low in nutritional value, and that healthy food are virtually invisible† (Jordan, 2010). This barrage of brain-altering subliminal messaging towards newly forming minds lends credence to how other areas of technology are creating pathways to enter impressionable youths. We live in a world that is technology driven in which new devices are created frequently to make life more convenient. The American Academy of Pediatrics (AAP) recommends that television viewing by children older than two years be limited to two hours per day or less avoided altogether for children younger than two years. Surveys of United States parents found that most families do not adhere to these recommendations† (Jordan, 2010). These families that provide this amount of television viewing for their children use it as a virtual nanny to keep the child entertained and distracted throughout the day. In today’s health conscious society, there are many reasonable alternatives to just keeping a child zoned out in front of various electronic devices. One such alternative that is catching on with many families is the Nintendo Wii. â€Å"The AHA and Nintendo recently teamed up to promote the use of the Wii Fit to help Americans meet recommended physical activity guidelines. The goal of the partnership is to teach people how so-called ‘active-play’ video games encourage regular exercise. If youre having a tough time getting your child to play outside, consider buying a video game that requires the child to get moving, Brown suggests† (Payne, 2010). The use of this new video game device has provided many families with not only an opportunity to exercise, but to also interact as a family unit. Interacting together provides an environment that can create future positive habits that might help in the obesity battle. Following recent studies on childhood obesity, it has been found that â€Å"In the United States, childhood obesity is on the rise; the percentage of obese children aged 6 to 11 more than doubled in the past two decades, while the percentage of obese adolescents aged 12 to 19 more than tripled, during the same period as well† (Li Hooker, 2010). Medical contributors to childhood obesity, such as genetics and/or heredity, are considered uncontrollable and unchangeable to the health and well-being of a child. The imbalance between calories consumed and calories used can result from the influences and interactions of a number of factors, including genetic, behavioral, and environmental factors. Studies indicate that certain genetic characteristics may increase an individuals susceptibility to excess body weight. However, this genetic susceptibility may need to exist in conjunction with contributing environmental and behavioral factors (such as a high-calorie food supply and minimal physical activity) to have a significant effect on weight. Genetic factors alone can play a role in specific cases of obesity† (CDC, 2009). Battling all these convenience issues will prove to be a lengthy social problem to be solved, but for the sake of future generations of children that will probably be the first to not outlive their parents, it is one that should have the highest priority. Parents establishing controls over guidelines set forth and constant monitoring of such to decrease childhood obesity is not a â€Å"sprint†, but more comparable to a â€Å"marathon†. This requires lifestyle changes both for the parent and the child. Constant monitoring on the parent’s part, along with both parent and child â€Å"staying the course† now will produce dividends for the future of a healthy America. We are all creatures of habit. In the end, the goal should always be for these changes to become second nature. We live in a society driven by a constant; change. Growth and expansion will continue to generate new technological advances, with downfalls associated. One such downfall, the â€Å"convenience factor† (convenient stores for junk food, convenient to watch television, play video games, watch a movie, talk or text on a cellular phone as opposed to physical exercise, convenient for parents to stop by fast food as opposed to healthy meals) will have a direct correlation between parental decisions and the health of children for future generations. Lack of parental controls in these areas in conjunction with the â€Å"convenience factor† will produce childhood obesity cases at record numbers. This increasingly growing disease will continue to be so if society does not stop being so convenient.

Wednesday, August 21, 2019

Methods of Warfare in 1st World War Essay Example for Free

Methods of Warfare in 1st World War Essay What methods of warfare were used in World War 1 and how did they change over the duration of the War? German Plan: In 1914 when war was declared Germany soon thought of a plan that they thought would win them the war known as the Schlieffen Plan which was soon put into action. The plan was if they could send all their troops through Belgium into France and take France within a matter of weeks before the Russian army was mobilised they could send all their troops to face Russia when Russia’s forces had fully mobilised. And so have a better chance of defeating Russia. Germany estimated it would take six weeks to conquer France and Belgium leaving them time to move their troops to the Eastern Front before Russia was fully engaged in the war. French Plan: In 1914 when war broke out the French followed their Plan 17 which was to send all their troops charging across the frontier and attack deep into Germany forcing the German soldiers to surrender. And so the French launched an attack on German forces in Alsace-Lorraine, the French troops were cut down by German machine gun fire and artillery, within 12 days 200,000 French troops had been killed forcing them to abandon the plan and retreat to Paris. British plan: In order to help out the French Britain created a small force they planned would help the French troops stop the Germans and so England sent the British Expeditionary Force (150,000 professional trained, well equipped troops) in 1914 to France in order to hold off the German forces and to hopefully help beat back the German troops. Unfortunately in September 1914 the BEF were pushed back to Marne where they and the French stopped the German advance and pushed them back to the River Aisne. It was here where both sides dug themselves in in trenches leading to a large stalemate between both sides. Trench Warfare: During the First World War trench warfare was the most common type of warfare used, due to the fact that tanks had only recently been created and aircraft were not very developed. The trenches stretched from the sea at Ostend all the way to the Alps. These trenches caused a stalemate due to the fact that taking an enemy’s trench was extremely difficult because they were well defended by many machine guns that would kill any incoming infantry. Machine were large, heavy guns that were devastatingly effective as defensive weapons as they could fire eight bullets per second killing platoons of soldiers in minutes if they went over the top. During the war artillery caused the most casualties as they often destroyed enemy positions and killed the soldiers within them. Even though the enemy would just go deep into the trenches underground where they would be safest from the bombs. Artillery guns were very inaccurate at the beginning of the war but by the end of the war artillery was more powerful and much more accurate. A key weapon used to drive enemies out of the trenches was poison gas. The gas could be in a grenade that could be chucked into a enemy trench or fired in an artillery shell or even dropped by plane. The gas tended to be chlorine causing soldiers to struggle to breathe or mustard gas that blinded or killed its victims. Lastly the trenches were very unhygienic, full of dead bodies and gunge of mud and blood on the floor. This meant bacteria and infections spread very quickly and so diseases were common which took the lives of many soldiers on both sides. Land Warfare: Before the war Land warfare was only infantry and artillery but British inventors in 1914 thought of the idea of the tank, which they took to generals, but was rejected as though it would be impractical but Churchill disagreed and funded the project. Tanks were first used two years later in the Battle of the Somme; they advanced ahead of the infantry crushing the enemies’ defences and then spray the enemy with machine gun fire. Seeing this the British morale was boosted as they thought Tanks could lead to the breakthrough that will win them the war. Unfortunately the tanks were very slow, not very maneuverable and unreliable as many tanks broke down before they reached the enemy. The first real success for tanks was at Cambria in 1917 where they easily broke through enemy lines but the infantry behind couldn’t keep up. By the end of the war both forces were using armor piercing machine guns and adapted field guns to destroy tanks meaning tanks weren’t as invincible as they thought they were at the beginning of the war. Air warfare: In 1914 planes had only recently been invented and so at first they were very simple and used to fly over enemy targets or trenches etc, and take pictures, which they would then take back to head quarters. When planes were seen taking pictures enemy aircraft would try to shoot them down, at first the pilot would fire pistols and rifles from their planes at their enemy as they hadn’t though of a way to shoot in-between the propeller without hitting and braking the propeller. It was not until April 1915 they had fixed this problem by fitting a machine gun that was synchronized so that bullets missed the propeller and by 1918 spectacular dog fights were taking place in the air with more advanced airplanes with more advanced weapons that played a large part in slowing down the German advance. So in four years the Royal Naval Air Service and Royal Flying Corps had gone from having 37 planes to 23,000 planes but really the air war was little compared to the war at land and sea. Sea Warfare: Lastly before the war Britain had the largest fleet of advanced ships in the world that belittled the German fleet. Throughout the war there were very few battles on the sea. British Ships were used more for blockading German ports and supply lines hoping this would cause Germany to run out of resources and surrender. The only major sea battle was the Battle of Jutland where the British fleet lost 14 ships but destroyed 11 German ships and successfully maintained the blockade. Throughout the war Germany used its U-boats to destroy merchant ships and allied war ships, at first the U-boat would warn the ship it was about to be attacked but this convention was abandoned later in 1915. To stop the losses of Allied ships, Britain created: Q-ships that looked like merchant ships but had heavy guns on board; Mines to stop U-boats going through the English channel; Depth charges that sometimes when dropped hit U-boats and destroyed them; Convoys to protect merchant ships and Long-Range aircraft to protect the convoys.

Three categories of textile

Three categories of textile 1.1 Background Study â€Å"Waste is defined as anything left over or superfluous, as excess material or by-products, anything rejected or useless, worthless or unwanted.† D Tanya and K Kathy, 1997. They also depicts three categories of textile and apparel waste in ‘Textile waste Lifecycle model namely, post-producer waste generated by manufacturers, pre-consumer waste generated by retailers and post-consumer waste generated by the public. For this research paper, post-producer waste is taken into consideration. In specific, denim waste from the supply chain industries is studied for the purpose of its management. Since Denim fabric is considered to be the toughest fabric and constitutes the maximum amount of cotton which is considered to be organic in nature. Thus it is appropriate to find its recovery system so that no denim waste is land filled or burnt in the atmosphere. In the research paper-â€Å"The Textile waste Lifecycle† in Clothing and Textile Research Journal, author discusses the growing attention towards solid waste management by textile and apparel industry to environmental responsibility and expanded efforts to reduce disposal of post-producer textile waste in landfills. Authors said that the Environmental awareness and subsequently the word â€Å"recycling† has been in common usage for 25 years. But finding ways of recycling textile waste as an alternative to landfill disposal is an ecological problem on which textile/apparel industry is already working. Though they are still working on to develop a Textile waste Lifecycle model to reduce the textile waste in all the categories of textile and apparel waste. Authors while introducing in the above research paper discusses that the vast majority of solid waste stream is contributed by post-producer waste from the industry including fiber producers, textile mills and fabric and apparel manufacturers. Therefore, â€Å"Recycling, a large component of the bigger environmental movement, has grown rapidly in recent years†. (D Tanya and K Kathy, 1997) He also mentioned that the interest towards recycling is due to many factors including green consumerism, rising waste disposal cost, an explosion of legislative initiatives and mandates and the evolution of waste recycling into smoothly running commodity industry. Discussed in the 2nd International conference of Textile Research Division under the topic â€Å"Textile waste-material Recycling† by (G. M. EI-Nouby, H. A. Azzam, S. T. Mohamed, and M. N. El-Sheikh, 2005) that large amounts of cloth scrap, clippings and loose sample scraps are created at â€Å"cut and sew† plants where garments are manufactured. These scraps of waste-material comprises of 15-30% of all types of garments manufactured. Also in the recent study in the research paper â€Å"Recycling Textile waste-Newer Dimensions† by S. Aishwarya(2010) found the total cotton fiber consumption is estimated to be 26 lakh tons per year, of which approximately 2,10, 000 of cotton dust which is a micro dust and also considered as a non-saleable waste which is produced during yarn manufacturing process. Due to environmental concerns, a large number of companies are currently developing manufacturing processes using alternative materials for their products and seeking new markets for the sub-products of their first-line production as said by the authors M.G Gomes, R. Fangueiro, C.Gonilho (2006). They also points that due to the higher prices for raw materials and man-made fibers, it will be utmost importance to recycle some of the waste. Linked to this, they also states that companies who want to stay in business have to be good environmentalists. But major issues facing the recycling efforts of Textile and apparel manufacturers are lack of market for recycled products and cost of processes as discussed by (D Tanya and K Kathy, 1997). They also did industry research which has indicated that small companies may have less waste to recycle which makes the cost of recycling too high. The problem is in particular concern for small manufactures. Therefore, it is important to find the cost-benefit of textile recycling industry. Larney and Annette, 2004 has also investigated the South African textile industry in regard to recycling practices, interest and willingness of the manufacturers and the problems barriers to enter the market for recycled products. The questionnaire and mail survey was done considering 103 textile manufactures including small, medium and large textile manufactures. Out of 10 statements asked in the questionnaire, rank wise, most of the companies would purchase carpets from recycled textile materials, then they said that they would manufacture apparel or other textile products made from recycled textile materials and so on. The last rank was given to the statement that â€Å"It is not economically feasible for my company to recycled textile material to produce new apparel or other textile products.† and â€Å"It is always more expensive for my company to use recycled textile materials then it is to use new textile materials in the production of apparel or other textile product s†. On the other hand, companies agreed to the fact that market strategy that creates a strong ultimate demand is an appropriate strategy to use with apparel or other textile products made from recycled textile materials. The research concluded that uncertainty of market strategies could be the economic barriers, as textile recycling is not cost effective in general even though most industries advised the strong trade demand through market strategy because then only the market would be moved forward. Therefore, it is still important to identify applications of textile waste apart from landfilling the waste which is considered as the major gap in the industry. Therefore, for the purpose of this research, it is important to find considerable denim waste (denim fabric which is constitutes the maximum cotton consumption and is considered to be organic in nature) from the industry which can be further analyzed to find its various applications (which means its recovery options) and the result may help in building â€Å"return service† for yarn manufacturers/denim manufacturers through denim apparel manufactures locally. 1.2 Project Objectives The objectives are to study the options for the recovery and recycling the denim wastes and to find the economic feasibility and opportunities by applying this to the supply chain from denim manufacturing through the Denim apparel manufacturing. In this the following objectives can be confirmed: To assess the amount of denim waste generated by the Denim apparel manufacturers To study what happens to denim waste and price considerations of rag dealers locally To analyze the various applications of denim waste reuse/recycling To recommend a â€Å"return service† for denim scrap locally CHAPTER-2 LITERATURE REVIEW Literature Review is analyzing previous researchers work to have an idea of what other people have done in the same area of study. The project revolves around classifying the prospects of industrial denim waste and its cost efficiency. Following sections of Literature Review discusses objective-wise researchers study. Firstly it will talk about the study on the amount of waste estimated in Textile Industry, then it reveals whether informal or any government organizations are involved in recycling/reuse practices, then finding the applications of denim recycling and finally looking at the cost effectiveness of the same. The Literature Review involve research papers of renowned authors, or any other articles from Internet or otherwise. It will involve Secondary data which means the data is collected from Secondary source all over the world and then summarized in the form of my own analyses author wise in each section. Although in Chapter-4, data collection in the form of Primary data is viewed by consulting Denim apparel manufacturers, rag dealers and recyclers to identify and facilitate the objectives of the research paper. 2.1 The amount and forms of Post-producer textile waste generated or recycled In the research paper-â€Å"The Textile Waste Lifecycle†, the authors revealed that the vast majority of solid waste stream is contributed by post-producer waste from the industry. For textiles, it was estimated between 1.5 and 1.9 billion pounds of new fiber and fabric wastes annually by fiber producers, textile mills and fabric manufactures in USA. Out of 2% of the total nations annual post-producer textile waste(which amounts to 11.2 billion tons), apparel manufacturers waste contributed 450 to 600 million tons annually in the form of apparel cuttings. Media attention to various U.S industries potential for ecological damage as contribution to sold waste stream has pressured the textile industry to respond with alternatives other than landfilling waste according to the author. And this environmental pressure has had dramatic impact the last ten years as companies have added environmentally sound management philosophy. Therefore, the authors analyzed a â€Å"Textile Waste L ifecycle model† which is also shown in Figure: 1 to show the integration of post-producer and post-consumer textile waste with resalable and reusable new products. Also the model contribute to the philosophy that while everything must go somewhere, there are more options than landfilling. The above figure of Textile Waste Lifecycle Model reveals that Post-producer textile waste may be disposed of in three ways. Firstly, it may enter the solid waste stream and end in landfills or waste incinerators. The second option is converting the solid waste into energy to power the manufacturing process. The third option is to sell the waste to textile waste recycler who shreds garments, fabric or fiber waste into new fiber. The author also quoted various examples of textile recyclers in order to establish the fact that what they are doing with the post-producer textile waste which is discussed in section 2.2.Authors in the end of this research paper provides further framework for further dialogue about what constitutes the textile waste and finding means by which textile waste is or can be disposed. Likewise, many avenues for further study were established. There are still voids and gaps in the market so as to understand what constitutes the textile waste. Therefore authors in this research left initiatives for further finding the applications of various textile waste which forms the part of the objectives of research paper. Another recent survey by T.H. Christensen, G. Bhander, H. Lindvall, A.W. Larsen, T. Fruergaard, A. Damgaard, S. Manfredi, A. Boldrin, C. Riber and M. Hauschild, 2008 is also done to calculate the volume of textile production waste materials and the recycling level by Lithuanian textile, clothing and soft furniture production enterprise. 18 textile companies, 12 apparel industry companies and 10 companies of soft furniture production have been surveyed by questioning. A significant part of textile production waste is land filled. The transportation of textile waste for land filling requires additional investments including the continuously increasing pressure of taxation for waste disposal and transportation costs. With the EU Environmental Law getting stricter, the process of waste land filling will become more loss-making. The Resolution prohibits burying of all recyclable waste, including textile waste, from the year 2015 and prohibits burying of all residual waste, except the case s when the burying is inevitable or a danger arises, from the year 2025. The overall waste amount throughout the entire cycle of a textile fabric production from yarn manufacturing to fabric sewing may constitute upto 40-50% of raw materials quantity. On the other hand, the amount of textile waste generated in the apparel industry companies covers the interval of 3-22% in proportion to the raw materials used. The main part of all the waste (62.5%) consists of textile material cuttings. These are cuttings of different size with dyeing defects, stained, fine knitted fabric waste, woven fabric borders, weighted cuttings of woven fabrics (0.1-2mm length), and cutouts from garment sewing industry. Following Table-1 shows the waste amount and recycling degree according to enterprise type TABLE-1 Enterprise type Overall amount of waste, t Average amount of waste, t Amount of waste recycle/ used in co.,t Amount of waste solid given away, t Amount of waste solid transported for land filling, t Textile Production 1671.2 93 343.7 815.1 513.1 Apparel 1001.0 83 0 299.6 701.4 The research has shown the amount of waste produced by different industries, and how much it is reused, recycled and hw much thrown in landfill.Figure:2, 3 proves that more than half of the textile industry waste goes in the landfill and very less amount of waste is recycled. This research has revealed that how waste is going to put pressure on each and every industry, as they are already spending on transportation of waste and in future it is said that they also have to pay taxes for this waste disposal. By 2015 government will not allow to dispose off the waste in the landfill. The research only looked at the waste, its amount and how it is going to create problems in the future. But there are no ways how to recover or recycle is discussed. In 2005, the 2nd Conference of Textile Research Division already discussed â€Å"Ways and Means† to Textile -waste Recycling by authors, G. M. EI-Nouby, H. A. Azzam, S. T. Mohamed, and M. N. El-Sheikh which is discussed in following section 2.2 Therefore, from the above section it can be concluded that there is no proper study which has been witnessed by Denim textile/or apparel industry in specific. Though there are lot of studies done by various textile/apparel industries irrespective of specific industries such as Denim industry to identify the amount of waste and its further prospects. 2.2 The Recyclers and theirRecycling applications of Textile waste The 2nd Conference meetings Journal-â€Å"Textile Waste-Material Recycling†-Part-I- Ways and Means† includes the extensive coverage of previous work. It also attempts to convert textile waste material into useful forms, non-woven fabrics or spun yarns. The methods and machines used in textile waste material recycling were also covered to increase the ability of Egyptian textile industry to compete in the era of open markets and globalization. The above figure: 5 show the technical solution and non-technical solution to manage textile waste which is also discussed in Figure: 1 by Domina and Kathy to integrate the textile waste among all the categories including post-producer waste, pre-consumer waste and post-consumer waste. But here the question arises that what recyclers are doing in order to find various applications of the textile waste material. Therefore, D, Tanya and K Kathy, 1997 in the research paper-â€Å"The Textile Waste Lifecycle† conducted a survey and found various textile recyclers and what they are actually doing to reduce post-producer textile waste. Following are the textile recyclers namely, Crown Textile recycler, where fiber makes up 60% of the all solid waste, of which 95% is recycled as energy Leigh Fibers Inc., a textile and apparel waste recycler that purchases bundled textile waste such as carding, fabric scraps and thread, shreds waste into fibers which are then sold. Eco Fiber Canada, Inc. makes cotton yarn from fiber and fabric waste to be then made into a variety of apparel products. Levis Strauss and company has recycled 400000 pounds of denim scrap into paper Cone mills recycle polypropylene wrapping from cotton bales, polyester and other materials. Russell Corp. rebales its cutting waste for resale or returns it into fiber for use in spinning Burlington recycles old jeans and denim scrap into new denim fabric which Levis Strauss makes into Jeans According to the survey, both the authors reports that 73% of the post-producer fabric waste is recycled annually, approximately 150 million pounds are reprocessed into fiber, 200 million pounds are sorted by color and exported to respun, and 100 million pounds are used to make wipers. They also said that due to the difficulty in separating laminated fabrics and high usage of blended yarns and fabrics, only about 2% of industrial fabric waste are recycled. Since our project aims at Denim waste recycling, there should be no difficulty of such kind as in blended yarns and fabrics. One of the Denim Return Project done by Bradmill Group in Denim Park in 1999 revealed that Denim waste are generated such as warp tailings, denim selvage, fabric waste and other smaller waste. The group also found the opportunities for the recycling and reuse for denim wastes and to provide this to a totally a recycling activity for their group as well as fulfilling a need for waste reduction at Denim Park facility. The opportunities of denim reuse that Bradmill Group investigated are: Shredding and Recycling into a new spinning operation Shredding and Reuse as a fiber base for paper and cardboard Sorting and packaging for sale locally and overseas Briquetting for combustion in Bradmill Undare boilers Shredding and use as filling material for a range of non-woven applications including wadding for furniture, cushions, pillows and car wadding Shredding and use in mushroom production Shredding for use as an absorbent material(mainly for oil spills) Use of large scraps as polishing rags Certain aspects are identified by Bradmill, 1999 which affect the recyclability of denim waste which are as follows: Fiber length, which is identified as critical to the end application. Short length fibers which are less than 3mm cannot be respun, whereas long length fibers are suitable for respinning Impurities (such as oil, dirt, vegetable and metal contamination), is another critical aspect of fiber reuse which can cause serious hazards in reprocessing. Sizing is a starchy material which is required during weaving operations. Therefore, waste fabrics/fibers require desizing as Sizing will affect fiber absorbency, which will reduce its effectiveness in oil spill collection, paper production, and may reduce its usability in other non-woven applications. Lastly, Color in the fiber can have a positive or negative effect on recyclability. Since residual colors in denim fibers many affect the final product if it has a particular application For example: high quality white paper. Some recycling operations require use colored fibers sorted into colors for respinning. Careful color mixing of fibers to achieve specified colors without requiring dyeing. This type of operation requires cost-cutting input of approximately 250 tonnes of waste per month whereas Bradmill produces approximately 20 tonnes per month. A basic breakdown of reuse fiber requirements is discussed in Table: 2 according to the survey done by Bradmill. Again the major issues facing the recycling efforts of textile and apparel manufacturers are lack of market for recycled products and cost of processing as also discussed by the famous authors D Tanya and K Kathy, 1997 Therefore, there are still gaps in the market to find the cost-benefit (or cost effectiveness) of the opportunities of Denim reuse/recycling business. In the section 2.3 certain researches have been compiled to analyze the full cost and cost-benefit of recycling business of solid waste management. TABLE: 2 APPLICATION FIBER CHARACTER SHORT LONG COLORED SIZED METAL CONTAM. Respinning for colored yarn à ¼ à ¼ Desizing may be required Paper Production à ¼ Blue is ok(may be Black) Desizing may be required Paper board Production à ¼ May require Bleaching à ¼ Shredding for fill à ¼ à ¼ à ¼ à ¼ Shredding for Absorbent à ¼ à ¼ à ¼ à ¼ Combustion à ¼ à ¼ à ¼ à ¼ à ¼ Non-woven à ¼ à ¼ May require Bleaching May require Desizing Rags Scraps 8cm. sq.(Min.) à ¼ à ¼ N/A Mushroom Production à ¼ à ¼ à ¼ à ¼ Another recent research by S. Aishwariya in the research paper â€Å" Recycling Textile waste-Newer dimensions(2010) found that willow waste(which is a short fiber waste considered as non-salable and also just disposed off as landfills) in India according to the unforeseen statistical report amounts to 80,000-85,000 tones per annum. Therefore, this non-resalable can be collected, processed and converted into biocompost by the use of vermicomposting and enzymes technology which can be a very convincing effort to reduce and recycle waste. â€Å"Vermicomposting in the broad sense can be termed as waste minimization which is a very effective technology for managing solid organic wastes, into highly beneficial and valuable compost that can be used as supplement to increase soil fertility.† 2.3 Cost Analysis of Textile Recycling business B Margaret and P Paul, 1998 talks about the real cost of waste in the research paper -â€Å"The waste minimization of food and drink industry† and explains that â€Å"The cost of waste is not only the cost of getting rid of it, but also the value of what you are getting rid of. According to the authors, the real cost of waste can be divided into two categories, the visible costs and the hidden cost. But it is said that in the apparel industry, efforts are made towards waste minimization but still there is a lot of waste generated as discussed in section 2.1 of this chapter. Because, nowadays automated grading and optimized placements of garment pieces within a marker are powerful, but also optimizing the mapping of the markers to the different rolls of fabric is the key to optimizing fabric consumption and lowering costs. (Retrieved from a solution case study â€Å"Integrated Solutions Increase Efficiency and Reduce Waste in Clothing Manufacturing† by REACH technologies) Therefore, S Michael, D Mathew, M Scott, G Cathleen, E Matt, G Beth, 1997 of the â€Å"Division of Pollution Prevention and Environmental Assistance(DPPEA)† by the department of Environment, Health and Natural Resources conducted a study on â€Å"Analysis of the Full Costs of Solid Waste Management for North Carolina local governments.† The study found that the cost-effectiveness of recycling program (compared to solid waste collection and disposal) correlate the local governments recycling rate i.e. the local governments that achieve high recycling rates are more likely to operate recycling programs that are less expensive per ton than solid waste collection and disposal. The Full cost Analysis (FCA) helps local governments understand expenditures associated with collection, disposal and recycling so that the true costs and benefits of each sectors are understood. The study presents cost analyses by 15 North Carolina local governments and concentrated on cost of residential solid waste collection, solid waste disposal and The study presents and analyzes the quantitative from the completed full cost analysis worksheet of residential solid waste collection, disposal and recycling. All governments used the same methodology of identifying the Full cost work sheet as a standard format. To determine the efficiency measurements, cost-per-ton figures for 15 North Carolina local governments are taken as a sample of study. The Recycling cost includes the cost of collection, processing and marketing of materials. In the Figure: 6, It can be seen that recycling cost appears to be most costly solid waste management option per ton. This comparison is explored in more detail in Fig: 7 which show that relative cost effectiveness of recycling compared to solid waste collection and disposal cost is directly correlated to local government recycling rates. Finally, the research concluded three tangible conclusions: Full cost analysis provides a foundation for budgetary decisions Recycling can cost as little or less than solid waste management Local governments that achieve high recycling rates are more likely to operate recycling programs that are less expensive per ton than solid waste collection and disposal. That means there is a positive correlation between recycling rates and low recycling costs (compared to solid waste management) for 15 participating local governments. Therefore, from the above three sections discussed in this chapter, it can be concluded that a lot of studies are being done to find the opportunities of textile waste recycling and finding the positive correlation between recycling rates and low recycling cost. But, there is still a gap in the market to identify and analyze the opportunities of denim waste recycling and finding the best possible alternative applications of denim waste reuse in India. CHAPTER-3 METHODOLOGY The project waste management in the Apparel Industry is taken because of the global scenario. So in order to contribute to the noble cause this project will assess the amount of waste in the Denim apparel industry in specific and emphasize on the alternative use of Denim apparel waste. For carrying out the project, data needs to be collected and this can be divided into Primary and Secondary data collection. For this project, Primary data is the data (or information) which is collected from the Denim apparel Industries in Delhi/NCR and other textile waste members in the supplychain Delhi/NCR and other areas. For collecting Secondary data, information from e-books, e-journal articles etc. will be require to find out what all researches are carried out in this field, what is the result of this researches, how denim apparel waste can be an input for any other industry, which areas have not been thoroughly covered etc. Objective:1 To assess the forms and amount of denim waste generated by the Denim apparel manufacturers Sampling Frame: 3 Denim apparel Manufacturers Sample Technique: Convenience and Judgmental technique Research Design: Descriptive Data Collection: Primary data collection(Case Study) to analyze whether there is a considerable amount of waste in the Denim apparel Industry and if yes, then finding the various forms of Denim waste (through photography) for further analyzing the scope for the same Objective:2 To find the required information from recyclers in India Sampling Frame: 2 Textile/Denim waste recyclers in Delhi/NCR Sample Technique: Convenience technique Research Design: Descriptive/Exploratory Data Collection: Primary Data Collection(Depth Interview) to identify what is happening to the denim/textile waste collected, whats the market and future scope. (Photography)to show variety of denim waste collected by recyclers, the working environment and processes involved in their premises. Objective: 3To identify and analyze the opportunities out of Denim waste Recycling Sampling Frame: Data collected from Denim recyclers and Denim apparel Manufacturers Sample Technique: Judgmental technique Research Design: Descriptive/Exploratory Data Collection: Primary data collection (In-depth Interview) from recyclersto understand the processes involved at their end. Objective:4To recommend a â€Å"return service† for Denim scrap locally Sampling Frame: Data collection from Textile waste Recyclers Sample Technique: Judgmental technique Research Design: Descriptive/Exploratory Data Collection: Primary Data Collection (Case Study)- to finally recommend a return service which might help in adding something to the environment Objective:1 To assess the forms and amount of denim waste generated by the Denim apparel manufacturers This objective focuses on identifying the amount and forms of Denim waste generated by Denim apparel industry. Therefore, a pilot study was done in order to calculate the amount of denim waste in each department which is shown in Table-3 below. And forms of wastes are shown in different departments through photographs followed by Table-3 TABLE-3 Denim Manufacturers Name Department Waste Amount (in % out of 100% on an average) Forms of Waste

Tuesday, August 20, 2019

Enders Game Essay -- English Literature Essays

Ender's Game In our everyday life, we make decisions, decisions that may change the world we live in, if only slightly. However, each decision we make has an impact on our life and is therefore important. Each time we choose one thing over another, we draw from our previous knowledge to make the best choice we can. However, the ideas and thoughts that actually dictate how we make our choices are the morals that we base our life on. For some, these morals are simple and do not reflect what their life means to them, but for others, the morals that they live on are the foundation of their life. For those who have strong morals, those morals may be complex and hard to understand to others; for this reason, it is common for characters in a book to be simple and their actions to be taken only at face value. However, a few books are able to grasp the underlying meaning of certain actions and words, but none I have yet seen present the morals of characters and define so clearly the feeling and emotions o f people as Orson Scott Card has in his book, ENDER’S GAME. He creates his characters in ways that not only reveal the meanings of their lives, but he creates a story so gracefully interlaced within the feeling and emotions of his characters that the plot itself revolves around themes, ideas, and morals, not the other way around. He creates worlds with people so real that you remember them as real people; people from whom you take ideas and use to create a better life for yourself and others. Each character that Card creates has a unique personality. From the heartless people to the brilliant aliens, each person has their own way of doing things. His writing defines each character in ways such that you can feel how they feel and understand what they desire and need. What really makes this exceptional is that he not only creates the desires and needs of individual humans; he also creates a general feel of what humanity has evolved into. Furthermore, he has created new species that have needs and desires as a whole, thus creating a vast interconnecting universe that can not only be simply understood by the reader but can also be understood in a way that reveals how each character defines the meaning of life. Ender Wiggin, the main character, was born in a time when population restriction laws were in effect. The people of the time could only have two children.... ...is good because he is forgiving—he understands even those who hate him. This is his most important characteristic. He tries to understand everything, and is good at it. The reason he is so good in battle is because he wishes to understand even his enemy and he does, but as he puts it "In the moment when I truly understand my enemy, understand him well enough to defeat him, then in that very moment I also love him. I think it's impossible to really understand somebody, what they want, what they believe, and not love them the way they love themselves." To him this means that as soon as he delivers the killing blow, he loves his enemy and understands them, he hates himself for this. Another one of his morals is that he will try to undo what he has done. He accomplishes this by calling himself the Speaker For The Dead. To him this means that whomever he has killed he has understood, and the least he can do is share that understanding with others. In the case of the buggers, he killed them, understood them and loved them, and so he was able tell others that the buggers where really good, and through his writings he was able to redeem himself and bring to life those who he had killed.